
Flat Roof Repair
Hail-bruised membrane, split seams, and debris-packed drains on flat roofs get patched, welded, and cleared.
Flat Roof Repair →
As a Hickman commercial roof repair contractor, we inspect commercial roofs after hail and wind, then repair bruised membrane, loose edge metal, and cracked flashing.

Hickman commercial roof repair often follows a storm. Hail can bruise membrane and crack flashing without leaving a leak that day, and wind lifts edge metal and coping that then pry loose a little more with each gust.
A post-storm inspection marks every impact area and loose edge, puts temporary fixes on anything leaking, and records findings in a form owners can share with their insurer.
Storm damage hides well. These are the symptoms that show up after Hickman storms and the repairs that follow.
Hail bruising the membrane and cracking the insulation board below it.
We mark each bruise, take moisture readings, and patch or replace the damaged sections.
Wind getting under perimeter edge metal, where uplift on the roof is highest.
We refasten or replace the edge metal and reseal the membrane under it at the corners.
Coping cleats bent or fasteners pulled out during a gust.
We reset the coping on new cleats and reseal its joints.
Leaves, branches, and hail piled in strainers after the storm.
We clear drains and scuppers and replace any strainers the storm broke.
Here is how a Hickman roof looks right after a storm, and once the storm repairs are finished.
Storm repairs in Hickman can call on all four of our repair services, depending on the roof and what the storm hit.

Hail-bruised membrane, split seams, and debris-packed drains on flat roofs get patched, welded, and cleared.
Flat Roof Repair →
Hail-dented or wind-lifted metal panels get refastened or replaced with panels of the same profile.
Commercial Metal Roof Repair →
Leaks that start days after a storm get traced to the bruise, crack, or lifted edge behind them.
Commercial Roof Leak Repair →
Plant roofs get storm checks around fans, stacks, and curbs, where wind loosens flashing first.
Industrial Roof Repair →Call and tell us when the storm came through and whether anything is leaking. Dated photos from the ground help, and we take it from there on the roof.
Storm repairs in Hickman follow four steps, starting with documentation.
We walk the whole roof after a storm, marking impact areas, lifted edges, and loose coping, and take moisture readings over bruised spots to find cracked board.
Photos, impact locations on the roof, and moisture readings go into a storm report, written so you can pass it to your insurer along with the repair estimate.
Anything leaking gets a temporary fix right away, so the building stays dry while the full repair list is priced and approved.
Bruised membrane and board, lifted edge metal, and loose coping get repaired with matching materials, and drains are cleared before we leave the roof.
Storm checks and repairs also reach the towns below and Lincoln itself. For anywhere else, call us or send us a message.
Parapet, coping, and wall-flashing repairs on older brick buildings.
Seward commercial roof repair →Answers for Hickman owners after hail, wind, and heavy rain.
From the ground, look for lifted flashing, loose or missing edge metal and trim, and debris on the roof. Inside, check ceilings for new stains and note any standing water you can see from a window. Stay off a wet or damaged roof. We handle the seams, penetrations, and drains, where storm damage is hard to see from below.
Yes. Hail work in Hickman covers marking each impact area, moisture readings to find cracked board, temporary fixes on active leaks, and repairs to bruised membrane, dented panels, and cracked flashing. Findings come in a report you can share with your insurer.
The number of impact areas, how much insulation board cracked or got wet, and how much edge metal or coping has to be reset drive the price. Roof height, access, and rooftop equipment add to it. Each item gets its own price on the estimate, so storm repairs and older wear are easy to tell apart.
We do. Metal shops and storage buildings around Hickman take hail dents, wind-lifted panels, and loosened fasteners. We refasten what can be saved, replace panels that are cracked or holed with ones of the same profile, and reseal the laps around them.
It often does. A bruise can crack the insulation board under the membrane or weaken the membrane itself, and the leak shows up weeks later. That is why we take moisture readings over impact areas instead of judging from the surface alone.
Tell us when the storm hit and what you see. We will inspect the roof, document the damage, and send a free estimate for the repairs.