
Flat Roof Repair
Flat roofs behind Seward parapets get seam, scupper, and base flashing repairs with membrane matched to the roof.
Flat Roof Repair →
As a Seward commercial roof repair contractor, we repair the parapets, coping, and flat roofs on older brick buildings, plus shops and warehouses around town.

Seward commercial roof repair often starts at the top of a brick wall. Older storefronts carry parapets capped with coping, and water that gets past a cracked coping joint can show up inside well away from the wall.
Tight lots and two-story fronts also shape the work. We plan ladder or lift access, protect the sidewalk side of the building, and stage materials where they stay out of customers' way.
These are the roof problems that bring Seward owners to us, with what usually causes each one and how we fix it.
Water entering through a cracked coping joint and running down inside the parapet.
We reseal or replace the coping joint and check the wall cap for loose sections.
Old base flashing that shrank and lifted where the roof turns up the parapet.
We install new base flashing, terminate it under counterflashing, and patch the membrane along the wall.
Scuppers through the wall clogged with debris, or set higher than the roof surface.
We clear each scupper, reseal its flashing, and lower or add drainage where water sits.
Lower back roofs on older buildings meeting the main wall with tired step flashing.
We rebuild the wall flashing at the joint and patch the lower roof where water ran under it.
Older brick roofs have their own trouble spots. Here is how they look before and after we work on them.
All four of our repair services reach Seward. Here is how each one shows up on buildings around town.

Flat roofs behind Seward parapets get seam, scupper, and base flashing repairs with membrane matched to the roof.
Flat Roof Repair →
Metal shops and storage buildings around Seward get fastener, lap, and rusted panel repairs.
Commercial Metal Roof Repair →
Stains on upstairs walls and ceilings get traced back to the coping, flashing, or seam letting water in.
Commercial Roof Leak Repair →
Plants and larger shops near Seward get flashing rebuilt around fans, curbs, and stacks.
Industrial Roof Repair →Call and tell us which wall is wet and how high the stain sits. That points us to the coping joint or flashing to check first.
Repairs on Seward buildings follow four steps, with access planned before the first ladder goes up.
We walk the roof along every parapet, check coping joints and scuppers, and look at upstairs walls and ceilings for stains from inside.
Ladder or lift placement, sidewalk protection, and material staging get planned around storefront hours and the buildings next door, so customers and tenants can still come and go while the roof work happens.
Coping joints, counterflashing, and base flashing get repaired first, since that is where most water enters on these buildings, then the membrane along the wall.
Each repaired joint and flashing run is photographed and marked on the repair record, so the next inspection knows exactly what was done.
Besides Seward, we take repair work in Lincoln and four more towns. Building somewhere else? Call us or send us a message.
Answers for owners of Seward shops, storefronts, and older commercial buildings.
The repair covers three spots: the coping on top of the wall, the counterflashing, and the base flashing where the wall meets the roof. Cracked coping joints are the usual entry point, and the water can surface inside far from the wall.
Coping joints get resealed or replaced, the wall base gets new flashing, and the membrane along the wall is repaired.
Cost depends on the roof system, how many spots need work, and what sits under them. On older brick buildings, coping and flashing repairs, access for two-story fronts, and any wet insulation found near the walls shape the price most. The inspection prices each item on its own, so you can see where the money goes.
Yes. Most storefront repairs happen while the shop stays open. We work from the roof and the rear of the building where we can, keep entrances clear, and put interior protection under any spot where we open the roof.
Start with a call or the estimate form, and include where the leak shows up and the age of the building if you know it. We set an inspection time, walk the roof, and give you a priced repair list for each item we find.
Many can. Built-up roofs with gravel take repairs at blisters, splits, and flashing, using compatible bitumen and felts. When moisture readings show wet insulation across most of the roof, repair stops making sense, and we explain that with the readings in hand.
Tell us about the building and where water shows up. We will inspect the roof and send a free estimate for each repair.